Inductive proximity sensors XS, inductive sensor XS1 M30, L60mm, stainless, Sn10mm, 12...24 VDC, M12 0.8 m
- Produttore:
- Schneider Electric
- Prezzo (IVA esclusa)
- € 64.93
- Codice Nuova Elva
- XS1M30KPM40LD
- Codice produttore
- XS1M30KPM40LD
- Disponibilità
- 2 in stock
The XS range is an offer of inductive proximity sensors for the detection, without physical contact, of metal objects. The advantages of inductive detection are numerous, no physical contact with the object to be detected. Thus avoiding wear and enabling detection of fragile or freshly painted objects. High operating rates. Fast response. Excellent resistance to industrial environments (robust products, fully encapsulated in resin). This sensor is designed for detection at fixed sensing distance. It is a factor 1 (Fe/Nfe) sensor for ferrous and non ferrous materials It features a stainless steel case and a M12 connector on 0.8m flying lead. Diameter 30mm, threaded M30 x 1.5. It has a sensing distance of 10mm. Four-wire, DC supply, 12V to 24V, solid state PNP + NPN, NO or NC programmable output.
Specifications
| Cable Length | 0.8 m |
|---|---|
| Certifications | CSA |
| Current | 0-15 mA |
| Enclosure Material | Stainless Steel |
| Height | 30 mm |
| Length | 60 mm |
| Material | Stainless Steel |
| Net Weight | 0.145 kg |
| Thread Type | M30 X 1.5 |
| Warranty Length | 18 months |
Specifications | |
| Electrical Connection | remote male connector M12, 4 pins |
| Size | 60 mm |
| Wiring Technique | 4-wire |
| Ip Degree Of Protection | IP67 conforming to IEC 60529 |
| Series Name | Application |
| Body Type | fixed |
| [Sn] Nominal Sensing Distance | 10 mm |
| Detector Flush Mounting Acceptance | flush mountable |
| Sensor Type | inductive proximity sensor |
| Switching Capacity In Ma | <= 200 mA overload and short-circuit protection |
| Sensor Design | cylindrical M30 |
| [Us] Rated Supply Voltage | 12...24 V DC reverse polarity protection |
| Enclosure Material | stainless steel : 304 CU |
| Output Circuit Type | DC |
| Device Application | factor 1 (Fe/Nfe) |
| Discrete Output Type | PNP and NPN |
| Discrete Output Function | 1 NO or 1 NC programmable |
| Type Of Output Signal | discrete |
| Range Of Product | Telemecanique Inductive proximity sensors XS |
| Cable Length | 0.8 m |
| Sensor Name | XS1 |
| Material | stainless steel |
Contractual warranty | |
| Warranty | 18 months |
Complementary | |
| Current Consumption | 0...15 mA no-load |
| Length | 70 mm || 60 mm |
| Net Weight | 0.145 kg |
| Switching Frequency | <= 1000 Hz |
| Thread Type | M30 x 1.5 |
| Differential Travel | 1...15% of Sr |
| Maximum Delay Recovery | 0.7 ms |
| Maximum Delay First Up | 5 ms |
| Supply Voltage Limits | 10-38 V DC |
| Wire Insulation Material | PvR |
| Detection Face | frontal |
| Height | 30 mm |
| Front Material | PPS |
| Maximum Delay Response | 0.3 ms |
| Status Led | output state 1 LED yellow) |
| Repeat Accuracy | 3% of Sr |
| Operating Zone | 0-8 mm |
| Maximum Voltage Drop | <2.6 V closed) |
| Threaded Length | 52 mm |
| Marking | CE |
Offer Sustainability | |
| Rohs Exemption Information | Yes |
| Mercury Free | Yes |
| Environmental Disclosure | ENVPEP111006EN |
| Sustainable Offer Status | Green Premium product |
| Reach Regulation | Reference contains Substances of Very High Concern above the threshold |
| California Proposition 65 | WARNING: This product can expose you to chemicals including: Diisononyl phthalate (DINP), which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
| Circularity Profile | ENVEOLI1110045 |
| Eu Rohs Directive | Pro-active compliance (Product out of EU RoHS legal scope) |
Environment | |
| Product Certifications | CSA || UL |
