Input-Module for Elevators Type G 2120 5501 700
- Produttore:
- CARLO GAVAZZI PANTEC
Dupline transmitter designed to be a part of the Dupline® concept for push buttons and lamps in elevators. Installer friendly mounting, operation and maintenance without require ment of any special tools or programming.
Features
8-channel transmitter
8 contact or NPN transistor inputs (G2120 5501)
Open printed circuit board
Bracket for DIN-rail mounting available
LED-indications for supply and Dupline® carrier
DC or Dupline® supplied
Channel coding by GAP 1605
Connect the DC supply voltage to the system through a G 2196 000X 700 Master Module, which also performs the channel generator function and the RS485 communication link to the elevator controller (please refer to the data sheet for G2196.. for details).
Every Input is given its individual address with the coding unit GAP 1605 (Please refer to the respective datasheet for details). The ON/OFF-signal that is applied to the input of the module is associated to the address given to that input. An input pulse stretcher (only G 2201 5501) is used on every input to assure that the changes of input signals (even extremely short ones) are communicated by the system.
No LED indication for Supply and Line when Dupline® supplied.
Specifications
Weight | 50 g |
---|---|
Input Specifications | |
Response time | ≤ 156 ms @ 128 channels |
Input pulse prolongation | Typ. 0.5 s |
Inputs | |
Start peak current | 20mA |
Contact resistance | ≤ 100Ω |
Max voltage drop | 1V |
Cable length | ≤ 3m |
Open loop voltage | 8.0 VDC |
Short-circuit current | 17µA |
Supply Specifications | |
Power supply DC types | Installation cat III (IEC 60664) |
Operational voltage (VDD In ) | 10-30 VDC (ripple included) |
Ripple | ≤ 3 V |
Reverse polarity protection | Yes |
Power dissipation | ≤ 0.5 W |
Current consumption | ≤ 20 mA |
Transient protection voltage | 800 V |
Insultation voltage | None |
General Specifications | |
Power ON delay | Typ. 2 s |
Indication for Supply ON | LED, green |
Dupline | carrier LED, yellow (No indication when Dupline® supplied) |
Humidity (non-condensing) | 20 - 80% |
Dimensions | Open PCB 72,3 x 59 mm 4 pcs. of nylon PA6 snap locks are included for mounting the PCB in ø 4.8 holes |
Weight | 50 g |
Environment | |
Operating temperature | -20 to +50°C (-4 to +122°F) |
Storage temperature | -50 to +85°C (-58 to +185°F) |
Mechanical Resistance | |
Shock | 15 G (11 ms) |
Vibration | 2 G (6 to 55 Hz) |
Accessories | |
Aluminum bracket for DIN mounting (Vertical) | 8047-bracket |
PVC bracket for DIN mounting (Horisontal) | ELEVAT-Bracket |
DIN-rail | FMD 411 |