Inductive proximity sensors XS, inductive sensor XS8 80x80x26, PBT, Sn60mm, 24...240VAC/DC, cable 2 m
- Produttore:
- Schneider Electric
- Prezzo (IVA esclusa)
- € 133.60
- Codice Nuova Elva
- XS8D1A1MAL2
- Codice produttore
- XS8D1A1MAL2
- Disponibilità
- Invia RdO
This XS flat (80 x 80 x 26 mm) inductive proximity sensor has a PBT case. It has a supply voltage of 24V to 240V AC/DC. This general purpose flat inductive proximity sensor has an increased range. It is mountable directly on a surface, thanks to 4 screws fixing points. It provides mechanical resistance and chemical withstand thanks to PBT case. It has a yellow LED for output status indication for easier sensor setup and troubleshooting. IP68 protection makes this product ready for the harshest environments. It can operate in very cold (-25°C) and hot environments (+70°C). It features double insulation for better people and system protection from electrical shocks. Its increased sensing range makes it ideal for process where precise circulation of objects is not possible. It is CCC, ECOLAB, CSA, UL certified.
Specifications
| Cable Length | 2 m |
|---|---|
| Certifications | CCC |
| Current | 10 mA |
| Depth | 26 mm |
| Enclosure Material | PBT |
| Height | 80 mm |
| Material | Plastic |
| Storage Temperature | -40-85 °C |
| Warranty Length | 18 months |
| Width | 80 mm |
Specifications | |
| Electrical Connection | cable |
| Wiring Technique | 2-wire |
| Ip Degree Of Protection | IP68 double insulation conforming to IEC 60529 |
| Series Name | general purpose |
| Body Type | fixed |
| [Sn] Nominal Sensing Distance | 40 mm flush mountable || 60 mm non flush mountable |
| Detector Flush Mounting Acceptance | non flush mountable |
| Sensor Type | inductive proximity sensor |
| Switching Capacity In Ma | 5...200 mA DC || 5...300 mA AC |
| Sensor Design | flat form 80 x 80 x 26 |
| Enclosure Material | PBT |
| [Us] Rated Supply Voltage | 24...240 V AC/DC 50/60 Hz |
| Output Circuit Type | AC/DC |
| Discrete Output Function | 1 NO |
| Type Of Output Signal | discrete |
| Range Of Product | Telemecanique Inductive proximity sensors XS |
| Cable Length | 2 m |
| Sensor Name | XS8 |
| Material | plastic |
| Size | 26 mm |
Contractual warranty | |
| Warranty | 18 months |
Complementary | |
| Current Consumption | <= 10 mA no-load |
| Maximum Delay First Up | 15 ms |
| Fine Adjustment Zone | 20-40 mm flush mountable || 20-60 mm non flush mountable |
| Supply Voltage Limits | 20-264 V AC/DC |
| Wire Insulation Material | PvR |
| Detection Face | frontal |
| Cable Composition | 2 x 0.34 mm² |
| Width | 80 mm |
| Front Material | PBT |
| Depth | 26 mm |
| Height | 80 mm |
| Maximum Delay Response | 0.3 ms |
| Maximum Voltage Drop | <5.5 V closed) |
| Marking | CE |
| Maximum Residual Current | 1.5 mA open state |
| Switching Frequency | <= 150 Hz |
| Differential Travel | 1...15% of Sr |
| Maximum Delay Recovery | 6 ms |
Offer Sustainability | |
| Rohs Exemption Information | Yes |
| Mercury Free | Yes |
| Environmental Disclosure | ENVPEP071001EN |
| Sustainable Offer Status | Green Premium product |
| Reach Regulation | Reference contains Substances of Very High Concern above the threshold |
| California Proposition 65 | WARNING: This product can expose you to chemicals including: Diisononyl phthalate (DINP), which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
| Eu Rohs Directive | Pro-active compliance (Product out of EU RoHS legal scope) |
Environment | |
| Product Certifications | Ecolab || CSA || UL || CCC |
| Ambient Air Temperature For Operation | -25-70 °C |
| Vibration Resistance | 25 gn +/- 2 mm 10-55 Hz)IEC 60068-2-6 |
| Shock Resistance | 50 gn 11 ms IEC 60068-2-27 |
| Ambient Air Temperature For Storage | -40-85 °C |
