inductive sensor XS1 M8, L33mm, stainless, Sn2.5mm, 12..24VDC, cable 2m
- Produttore:
- Schneider Electric
- Prezzo (IVA esclusa)
- € 33.89
- Codice Nuova Elva
- XS108B3PBL2
- Codice produttore
- XS108B3PBL2
- Disponibilità
- Invia RdO
This XS cylindrical (M8 thread) inductive proximity sensor has a PPS sensing face and a nickel plated brass case. It has a supply voltage of 12V to 24V DC. This general purpose threaded cylindrical inductive proximity sensor is flush mountable and has an increased sensing range. It is mountable directly on a surface or bracket, thanks to its outer thread and twin nuts. High corrosion and impact-resistant nickel plating, keeping aspect and performance of the sensor for a longer time. Nickel plated brass provides magnetic shielding to the sensor, better accuracy and immunity to magnetic disturbance. It has an annular LED for easy sensor status viewing, setup and troubleshooting. IP65 and IP67 protection makes this product ready for the harshest environments. It can operate in very cold (-25°C) and hot environments (+70°C). It is CSA, UL certified.
Specifications
| Cable Length | 2 m |
|---|---|
| Certifications | CSA |
| Current | 10 mA |
| Enclosure Material | Stainless Steel |
| Length | 33 mm |
| Material | Metal |
| Net Weight | 0.07 kg |
| Storage Temperature | -40-85 °C |
| Thread Type | M8 X 1 |
| Warranty Length | 18 months |
Specifications | |
| Electrical Connection | cable |
| Size | 33 mm |
| Wiring Technique | 3-wire |
| Ip Degree Of Protection | IP65 conforming to IEC 60529 || IP67 conforming to IEC 60529 |
| Series Name | general purpose |
| Body Type | fixed |
| [Sn] Nominal Sensing Distance | 2.5 mm |
| Detector Flush Mounting Acceptance | flush mountable |
| Sensor Type | inductive proximity sensor |
| Switching Capacity In Ma | <= 200 mA overload and short-circuit protection |
| Sensor Design | cylindrical M8 |
| [Us] Rated Supply Voltage | 12...24 V DC reverse polarity protection |
| Output Circuit Type | DC |
| Discrete Output Type | PNP |
| Discrete Output Function | 1 NC |
| Type Of Output Signal | discrete |
| Range Of Product | Telemecanique Inductive proximity sensors XS |
| Cable Length | 2 m |
| Sensor Name | XS1 |
| Material | metal |
Contractual warranty | |
| Warranty | 18 months |
Complementary | |
| Current Consumption | <= 10 mA no-load |
| Switching Frequency | <= 2500 Hz |
| Thread Type | M8 x 1 |
| Differential Travel | 1...15% of Sr |
| Maximum Delay Recovery | 0.2 ms |
| Maximum Delay First Up | 10 ms |
| Supply Voltage Limits | 10-36 V DC |
| Wire Insulation Material | PvR |
| Detection Face | frontal |
| Enclosure Material | stainless steel 303 |
| Cable Composition | 3 x 0.11 mm² |
| Maximum Delay Response | 0.2 ms |
| Front Material | PPS |
| Status Led | output state 1 LED yellow) |
| Operating Zone | 0-2 mm |
| Maximum Voltage Drop | <2 V closed) |
| Threaded Length | 25 mm |
| Marking | CE |
| Length | 33 mm |
| Net Weight | 0.07 kg |
Offer Sustainability | |
| Rohs Exemption Information | Yes |
| Mercury Free | Yes |
| Environmental Disclosure | ENVPEP111006EN |
| Sustainable Offer Status | Green Premium product |
| Reach Regulation | Reference contains Substances of Very High Concern above the threshold |
| California Proposition 65 | WARNING: This product can expose you to chemicals including: Diisononyl phthalate (DINP), which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
| Circularity Profile | ENVEOLI1110045 |
| Eu Rohs Directive | Pro-active compliance (Product out of EU RoHS legal scope) |
Environment | |
| Product Certifications | CSA || UL |
| Ambient Air Temperature For Operation | -25-70 °C |
| Vibration Resistance | 25 gn +/- 2 mm 10-55 Hz)IEC 60068-2-6 |
| Shock Resistance | 50 gn 11 ms IEC 60068-2-27 |
| Ambient Air Temperature For Storage | -40-85 °C |
