I/O module - AXL F AO4 1H - 2688527
- Produttore:
- PHOENIX CONTACT
- Prezzo (IVA esclusa)
- € 411.35
- Codice Nuova Elva
- 2688527
- Codice produttore
- 2688527
- Disponibilità
- Invia RdO
Axioline F, Analog output module, Analog outputs: 4, 0 V ... 5 V, -5 V ... 5 V, 0 V ... 10 V, -10 V ... 10 V, 0 mA ... 20 mA, 4 mA ... 20 mA, connection method: 2-wire, transmission speed in the local bus: 100 Mbps, degree of protection: IP20, including bus base module and Axioline F connectors
Features
4 analog output channels for the connection of either voltage or current signals
Bipolar voltage outputs, unipolar current outputs
Connection of actuators in 2-wire technology
Voltage ranges: 0 V ... 10 V, ±10 V, 0 V ... 5 V, ±5 V
Current ranges: 0 mA ... 20 mA, 4 mA ... 20 mA
Short-circuit-proof outputs
No derating in all ranges
Short signal rise times
Driving of high loads
Device rating plate stored
BV
BSH
cULus Listed
EAC
LR
RINA
PRS
NK
DNV GL
KR
ABS
UL Listed
cUL Listed
Specifications
| Depth | 54 mm |
|---|---|
| Height | 126.1 mm |
| Strip Length | 8 mm |
| Width | 35 mm |
Axioline potentials | |
| Designation | Axioline F local bus supply (UBus) |
| Supply voltage | 5 V DC (via bus base module) |
| Current consumption | typ. 120 mA |
| Current consumption | max. 150 mA |
| Designation | Supply for analog modules (UA) |
| Supply voltage | 24 V DC |
| Supply voltage range | 19.2 V DC - 30 V DC (including all tolerances, including ripple) |
| Current consumption | typ. 60 mA (4 voltage channels, 10 V output) |
| Current consumption | max. 85 mA (4 voltage channels, 10 V output) |
| Current consumption | max. 110 mA (4 current channels, 20 mA output, 500 Ω load) |
| Current consumption | max. 125 mA (4 current channels, 24 mA output, 500 Ω load) |
| Power consumption | max. 3 W (at UA) |
| Power consumption | typ. 2.04 W (at UBus and UA) |
| Power consumption | max. 3.75 W (at UBus and UA) |
| Protective circuit | Surge protection of the supply voltage electronic (35 V, 0.5 s) |
| Protective circuit | Polarity reversal protection of the supply voltage Polarity protection diode |
| Protective circuit | Transient protection Suppressor diode |
Electrical isolation | |
| Test section | 5 V supply of the local bus (UBus) / 24 V supply (I/Os) 500 V AC 50 Hz 1 min. |
| Test section | 5 V supply (logic)/analog outputs 500 V AC 50 Hz 1 min. |
| Test section | 5 V supply of the local bus (UBus) / functional ground 500 V AC 50 Hz 1 min. |
| Test section | 24 V supply (I/O)/analog outputs 500 V AC 50 Hz 1 min. |
| Test section | 24 V supply (I/O) / functional earth ground 500 V AC 50 Hz 1 min. |
| Test section | Analog outputs/functional earth ground 500 V AC 50 Hz 1 min. |
Environmental Product Compliance | |
| REACh SVHC | Lead 7439-92-1 |
| China RoHS | Environmentally Friendly Use Period = 50 years |
| China RoHS | For details about hazardous substances go to tab 'Downloads', Category 'Manufacturer's declaration' |
Connection data | |
| Designation | Axioline F connector |
| Connection method | Push-in connection |
| Note on the connection method | Please observe the information provided on conductor cross sections in the 'Axioline F: system and installation' user manual. |
| Conductor cross section solid min. | 0.2 mm² |
| Conductor cross section solid max. | 1.5 mm² |
| Conductor cross section flexible min. | 0.2 mm² |
| Conductor cross section flexible max. | 1.5 mm² |
| Conductor cross section AWG min. | 24 |
| Conductor cross section AWG max. | 16 |
| Stripping length | 8 mm |
Dimensions | |
| Width | 35 mm |
| Height | 126.1 mm |
| Depth | 54 mm |
| Note on dimensions | The depth is valid when a TH 35-7,5 DIN rail is used (according to EN 60715). |
Interfaces | |
| Designation | Axioline F local bus |
| No. of channels | 2 |
| Connection method | Bus base module |
| Transmission speed | 100 Mbps |
Analog outputs | |
| Number of outputs | 4 |
| Connection method | Push-in connection |
| Connection technology | 2-wire |
| Note regarding the connection technology | shielded, twisted pair |
| Output name | Analog outputs |
| D/A converter resolution | 16 bit |
| Type of protection | Short-circuit and overload protection |
| Type of protection | Transient protection |
| Protective circuit/component | electronic |
| Protective circuit/component | Suppressor diode |
| Data formats | IB IL, S7-compatible |
| Representation of output values | 16 bits (15 bits + sign) |
| Process data update | 140 µs |
| Current output signal | 0 mA - 20 mA |
| Current output signal | 4 mA - 20 mA |
| Load/output load current output | ≤ 500 Ω |
| Voltage output signal | 0 V - 5 V |
| Voltage output signal | -5 V - 5 V |
| Voltage output signal | 0 V - 10 V |
| Voltage output signal | -10 V - 10 V |
| Load/output load voltage output | ≥ 1 kΩ |
| Precision | typ. 0.1 % (of output range final value) |
Ambient conditions | |
| Air pressure (operation) | 70 kPa - 106 kPa (up to 3000 m above sea level) |
| Air pressure (storage/transport) | 70 kPa - 106 kPa (up to 3000 m above sea level) |
| Degree of protection | IP20 |
| Ambient temperature (operation) | -25 °C - 60 °C |
| Ambient temperature (storage/transport) | -40 °C - 85 °C |
| Permissible humidity (operation) | 5 % - 95 % (non-condensing) |
| Permissible humidity (storage/transport) | 5 % - 95 % (non-condensing) |
Standards and Regulations | |
| Mechanical tests | Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g |
| Mechanical tests | Shock in acc. with EN 60068-2-27/IEC 60068-2-27 30g |
| Mechanical tests | Continuous shock according to EN 60068-2-27/IEC 60068-2-27 10g |
| Protection class | III (IEC 61140, EN 61140, VDE 0140-1) |
